Difference between revisions of "BatBoard"
From Kevin Darrah Wiki
| (One intermediate revision by the same user not shown) | |||
| Line 11: | Line 11: | ||
* Uses the popular [http://ww1.microchip.com/downloads/en/DeviceDoc/20001984g.pdf MCP73831] to handle the battery charging | * Uses the popular [http://ww1.microchip.com/downloads/en/DeviceDoc/20001984g.pdf MCP73831] to handle the battery charging | ||
* Ultra Low Iq (~2uA) Linear 3.3V Regulator [http://ww1.microchip.com/downloads/en/DeviceDoc/22008E.pdf MCP1702] | * Ultra Low Iq (~2uA) Linear 3.3V Regulator [http://ww1.microchip.com/downloads/en/DeviceDoc/22008E.pdf MCP1702] | ||
| + | * Robust Micro USB connector for charging and standard JST connector for battery connection | ||
| + | * Breaks out the USB 5V in for detection or as a separate supply, also Battery Voltage is available for fuel gauging... or again as a separate supply. | ||
== Schematic == | == Schematic == | ||
Latest revision as of 13:55, 30 December 2016
...Back to Projects:
Contents
The Battery Board Board
Introduction
The battery board is a simple Lithium Battery charger and power supply. It has an ultra low power LDO (Low DropOut Regulator) to generate 3.3V from the battery input. It works nicely with the Platform Board or right into your breadboard.
- Uses the popular MCP73831 to handle the battery charging
- Ultra Low Iq (~2uA) Linear 3.3V Regulator MCP1702
- Robust Micro USB connector for charging and standard JST connector for battery connection
- Breaks out the USB 5V in for detection or as a separate supply, also Battery Voltage is available for fuel gauging... or again as a separate supply.
Schematic
Purchase
Coming soon - given to Patrons Dec 2016
Parts
The parts list can be downloaded HERE This can be directly uploaded into Digikey if you'd like.
Assembly
Tutorials
Coming soon
