Revision as of 10:43, 8 November 2016

...Back to Projects:

The 328 Board

Introduction

The 328 board is a bare bones breakout board for the ATMEGA328P. Nearly all of the IO has been broken out to standard 0.1" spaced through holes, which also fits nicely into one of the slots of the Platform Board The native AVR programming header and standard 6 pin right angle header to allow for an Arduino Compatible experience.

Schematic

Purchase

Coming soon - given to bare board members October 2016

Parts

It is up to you to order the parts. The list can be downloaded **HERE**. This can be directly uploaded into Digikey if you'd like.

Assembly

Here is what the board looks like when assembled - the only missing components here are the 9 pin headers and the x6 pin AVR programming header

And here's a video showing how I actually hand assembled this board:

Programming

If you want to be able to program the ATMEGA 328 from the Arduino IDE, then you'll need to first load the boot loader. My preferred method is to use Nick Gammon's sketch running on another Arduino:

 A big thanks to Nick Gammon for putting this together:  http://www.gammon.com.au/bootloader

 The git hub link is here:
 https://github.com/nickgammon/arduino_sketches
 "click the Download Zip button, then pull out the Atmega Programmer folder and drop that right into your Sketches folder"

 Another way to do it:
 https://github.com/bkibby/OptiLoader

Tutorials

Coming soon