Difference between revisions of "TrigGateway"
From Kevin Darrah Wiki
(Created page with "...Back to Projects: 600px The Weather Board is a breakout for the [https://www.bosch-sensortec.com/bst/products/all_products/bme280 BME280] (Tem...") |
|||
| Line 1: | Line 1: | ||
...Back to [[Projects:]] | ...Back to [[Projects:]] | ||
| − | [[File: | + | [[File:trigGatewayHome.png|600px]] |
The Weather Board is a breakout for the [https://www.bosch-sensortec.com/bst/products/all_products/bme280 BME280] (Temperature/Humidity/Pressure) and [http://www.ti.com/lit/ds/symlink/lmt01.pdf LMT01]. The board was designed to pair up nicely with the [[trigBoard]]. | The Weather Board is a breakout for the [https://www.bosch-sensortec.com/bst/products/all_products/bme280 BME280] (Temperature/Humidity/Pressure) and [http://www.ti.com/lit/ds/symlink/lmt01.pdf LMT01]. The board was designed to pair up nicely with the [[trigBoard]]. | ||
Revision as of 21:22, 8 November 2018
...Back to Projects:
The Weather Board is a breakout for the BME280 (Temperature/Humidity/Pressure) and LMT01. The board was designed to pair up nicely with the trigBoard.
Note! Make sure to watch the video below on the assembly of the board:
Schematic
Programming
For the BME280, the Sparkfun Library works perfectly. Only thing to change is the Address to 0x76, and of course make sure to use I2C. I tested using the "I2C_ReadAllData" example.
The LMT01 is very simple to work with - follow this tutorial, make sure the code is setup for the ESP8266 and the pulsePin is 14.
CODE HERE
