Pusher

...Back to Projects:

The Pusher Board is an IoT project that does one thing - it pushes you a notification triggered by a digital input. Well, it's much more than that, but this is the inspiration. I wanted to design a WiFi board that essentially sleeps most of its life, but when that door switch, flood sensor, motion sensor, etc.. gets triggered, I just want a notification immediately on my phone. And that's about it... a perfect IoT device in the background doing its job.

Version 1

Very first prototype board

• Mostly through hole components for easy testing and assembly
• ESP8266 based (ESP-12S module)
• Wake on regular timer interval - set for 1hr during my testing.
• Wake on Digital Input - Normally Closed type contact, so works nicely with door sensors.
• Tested sleep current <1uA that's years and years of battery life.
• Max Battery Voltage is ~4.2VDC, so designed to be used with standard Lithium Batteries.
• Note: this board does require re-work in order to exercise all of the functionality. Please watch assembly videos below for detailed information

Here's a quick demo!

Installed on my door for testing:

Schematic

Purchase

given to Patrons

Parts

Parts list HERE

Assembly

Soldering the board together:

The rework changes:

Battery Voltage Measurement Circuit Change:

Tutorials

Programming and Testing the board:

That Sample Code HERE

Pusher Board Sending Push Notifications with Pushbullet and hardware walkthrough

I'm using Pushbullet for the Notifications:  https://www.pushbullet.com  (~$40/yr for unlimited pushes - 500/mo for free version)
That's nice because you don't need to develop your own app or anything.  Just set up an account with them and you're good to go.  Go to settings, account, and API - generate your token and copy that whole thing into the code - should be something like o.xyz...
THE CODE HERE
Richard's Channel: https://www.youtube.com/channel/UCLgqthbPlZGr8DuHDKKr9EA
And where I found the Pushbullet API code:  https://steve0hh.github.io/2016/12/04/how-to-send-push-notifications-using-esp8266.html

And if you're having problems getting the Arduino IDE setup, check out this video:

The .json url  HERE

Version 2