TrigBoardLightDetec

From Kevin Darrah Wiki
Revision as of 17:33, 21 October 2019 by Krdarrah (talk | contribs) (Created page with "...Back to Projects: 800px This is a cool project you can build with the trigBoard. Basically just an IoT water level detector. If ther...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

...Back to Projects:

TrigwaterLevel.png

This is a cool project you can build with the trigBoard. Basically just an IoT water level detector. If there's a leak, flood, or even if it rains, get a push notification immediately!! Best part is that the trigBoard uses such little current, that the battery will last for a very long time.

Here's the diagram for hooking up the probe:

NOTE!  I noticed when hooking up the wire to ground as shown in the video that the range was severely reduced.  I tried connecting it like it is here in the diagram and get much better performance

TrigWaterDiagv2.png

Make sure to set the jumpers properly, so you wake the board up when water is detected:

TrigWaterJumpers.png